[Phono-L] Re: Phono-L Digest, Vol 6, Issue 106

[Ron L'Herault]

The scraping sound has been cured.  I too only get 4-5 plays before it slows
and it does bog down on a worn Brunswick disk.  It is beginning to sound
like weak springs more than anything else now.

Ron L

-----Original Message-----
From: phono-l-bounces at oldcrank.org [mailto:phono-l-bounces at oldcrank.org] On
Behalf Of Aaron Hunter
Sent: Friday, May 01, 2009 6:47 PM
To: phono-l at oldcrank.org
Subject: [Phono-L] Re: Phono-L Digest, Vol 6, Issue 106

Ron
> My question would be, did it play longer before you took it apart?  I've
seen short springs in the 4 spring motors so you wouldn't get the longer
play that you would expect.  You would have to replace them with longer
springs.  Sorry, don't remember the lengths.  The short, weak springs in
mine won't even play a worn record through without stopping. Yet I can get 4
to 5 plays on good records. Get out the stethoscope (or long screwdriver) to
find the scraping sound.  Could be an improperly assembled barrel.  Does it
make the noise with the turntable removed?
>   
Aaron Hunter
> ------------------------------
>
> Message: 3
> Date: Wed, 29 Apr 2009 22:54:18 -0400
> From: "Ron L'Herault" <lherault at bu.edu>
> Subject: [Phono-L] 4 spring credenza motor problem
> To: "'Antique Phonograph List'" <phono-l at oldcrank.org>,
> 	<phonolist at yahoogroups.com>
> Message-ID: <BFFD241028C84F2A82A2711BD0226262 at ronlherault>
> Content-Type: text/plain; charset=us-ascii
>
> Hokay, list experts.  I need help.  The original problem was thumping
> springs.  So, you take them out (done that many times) clean them, and
> reinstall/relube. This should be pretty straight forward.  And these are
the
> ones with the clip outer ends and bent over inner ends.  They only go
> together one way.  It winds up fine but only plays 4 sides before it
starts
> to loose power and slow down when you try to play the 5th side.  Sometimes
> it makes a bit of a scraping sound but nothing is hitting the turntable.
> What have I missed?
>
> Thanks,
>
> Ron L
>
>   

_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org