[Phono-L] Screws needed

[john robles]

I'm really thrilled, thanks so much! I have emailed him with a copy to you.
John


--- On Tue, 2/17/09, C5fan at aol.com <C5fan at aol.com> wrote:

> From: C5fan at aol.com <C5fan at aol.com>
> Subject: Re: [Phono-L] Screws needed
> To: phono-l at oldcrank.org
> Cc: t at edisonTriumph.com
> Date: Tuesday, February 17, 2009, 7:05 PM
> I just got off the phone with him. He found a full set and
> wants $20 for  all 
> 4. You can e-mail him at _t at edisonTriumph.com_
> (mailto:t at edisonTriumph.com)  
> or call him at  314-822-2328. Let me know if you can't
> connect with him. Thanks
>  
>  
> In a message dated 2/17/2009 12:30:55 A.M. Eastern Standard
> Time,  
> john9ten at pacbell.net writes:
> 
> Hi
> I  am wondering if I can borrow that screw. Terry never got
> hold of me. Or 
> maybe  you can check with him??
> I have a friend who is a machinist who can make me  new
> ones.
> Thanks
> If you send me yours, my info is below.
> 
> John  Robles
> 290 Frances Street
> Ventura, CA 93003
> 
> 
> --- On Wed,  2/4/09, C5fan at aol.com <C5fan at aol.com>
> wrote:
> 
> > From:  C5fan at aol.com <C5fan at aol.com>
> > Subject: Re: [Phono-L] Screws  needed
> > To: phono-l at oldcrank.org
> > Date: Wednesday, February 4,  2009, 6:41 PM
> > The person to see about the shaver screws is Terry
> Baer  at 
> > _t at edisonTriumph.com_ (mailto:t at edisonTriumph.com)  .
> If  he
> > does not have  extras, contact me 
> > back.  I may  have a sample that I will need back, 
> but you
> > can use it for  sizing.
> >  
> >  
> > In a message dated 2/4/2009  9:52:07 A.M. Eastern
> Standard
> > Time,  
> > lherault at bu.edu  writes:
> > 
> > If no  one comes forward, John, and I'll bet 
> George
> > Vollema can help, take
> > the  shaver to an  industrial mill supply store.  They
> will
> > have all manner   of
> > set screws from the minute to the massive, and should
> be
> >  able to  find
> > something to fit.  I don't think Tom bothered  to
> > re-invent the  screw so they
> > should be a more or less  standard thread and
> diameter.  
> > Finding out which
> >  standard will be the trick. 8-)
> > 
> > Ron  L
> > 
> >  -----Original Message-----
> > From: phono-l-bounces at oldcrank.org 
> >  [mailto:phono-l-bounces at oldcrank.org] On
> > Behalf Of john robles
> >  Sent:  Wednesday, February 04, 2009 1:16 AM
> > To:  phono-l at oldcrank.org
> > Subject:  [Phono-L] Screws needed
> >  
> > Hello all
> > I am in desperate need of a set of  four  screws for
> an
> > Edison Trimph shaving
> > device. I know these will  be hard  to get. Failing
> tha,
> > does anyone know the
> > thread  on those so I can perhaps  ge someting
> temporary til
> > I do find  the
> > screws?
> > I would appreciat it  very   much!
> > Thanks
> > John
> >  _______________________________________________
> > Phono-L   mailing  list
> > http://phono-l.oldcrank.org
> > 
> >  _______________________________________________
> > Phono-L   mailing  list
> > http://phono-l.oldcrank.org
> > 
> >  
> > **************Who's never won?  Biggest Grammy
> Award
> >  surprises of all time on 
> > AOL Music. 
> >  
> (http://music.aol.com/grammys/pictures/never-won-a-grammy?ncid=emlcntusmusi00000001)
> >  _______________________________________________
> > Phono-L mailing  list
> >  http://phono-l.oldcrank.org
> _______________________________________________
> Phono-L  mailing  list
> http://phono-l.oldcrank.org
> 
> 
> **************You can't always choose whom you love,
> but you can choose how 
> to find them. Start with AOL Personals. 
> (http://personals.aol.com/?ncid=emlcntuslove00000002)
> _______________________________________________
> Phono-L mailing list
> http://phono-l.oldcrank.org