[Phono-L] Victor "O" Case Qustions
Jeffry Young, D.O.
jeffryy at prevea.com
Sat Oct 4 11:43:50 PDT 2008
It is the MOTOR BOARD that is loose. I may not have been clear. The
bottom panel is secured into the cabinet with screws, as it is supposed
to be. The later "O" case is hinged at the motor board. This is the
machine that I personally own. The case I am curious about is a spare,
is early, and the MOTOR BOARD is not attatched to the cabinet. Nor do I
see how it could have been without it just being glued.
Sorry about any confusion!
Jeff
Wisconsin
-----Original Message-----
From: phono-l-bounces at oldcrank.org [mailto:phono-l-bounces at oldcrank.org]
On Behalf Of Phonophan at aol.com
Sent: Saturday, October 04, 2008 12:04 PM
To: phono-l at oldcrank.org
Subject: Re: [Phono-L] Victor "O" Case Qustions
You might have an altered or replaced bottom board. Please send me a
picture
of it to my personal e-mail. I'll let you know what I think. The bottom
boards of 0s were screwed in place to allow access to the motor. I'd
like to see
the one you have. Cheers,
Tim Fabrizio
phonophan
PO Box 747
Henrietta, NY 14467
TEL 585 582 1586
FAX 585 582 2624
Web site: www.phonophan.com
In a message dated 10/4/2008 12:00:36 P.M. Eastern Daylight Time,
jeffryy at prevea.com writes:
I have an early Victor O mahogany case that I am trying to figure out.
It is the type with the bottom board screwed into the cabnet. If you
needed to access the motor, you take off the bottom board, and could
remove the motor this way. Here is the issue. The motor board on this
cabinet is loose! There are obviously no hinges. There are no nail
holes
or fasteners to speak of that I can see. So..., was this simply horse
hide glued to the cabinet? Is it appropriate to just glue it back on?
Thanks,
Jeff
Wiscosnin
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
**************New MapQuest Local shows what's happening at your
destination.
Dining, Movies, Events, News & more. Try it out!
(http://local.mapquest.com/?ncid=emlcntnew00000001)
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
More information about the Phono-L
mailing list